[consumption]
For fuel consumption calculations to be active there are a couple of pre-requisites:
- You must be running my custom firmware that integrates an injection seconds calculation into the serial data feed. This is based on a PR provided by another developer but unfortunately it hasn’t yet been integrated into the master build.
- For best accuracy, you need to ensure that your tune is configured so that the injector voltage correction mode is set to ‘Open time only’ and not ‘Whole PW’.
| Setting | Type | Explanation |
|---|---|---|
| injectorflowrate | Integer, cc/min | The flow rate of the injectors |
Other settings in this section are maintained solely by the application and should not be altered.